blib/lib/Paws/MediaConvert/InputTemplate.pm untested

filter: Statementstmt 0.0% 0 / 37 Branchbran n/a Conditioncond n/a MC/DCmcdc n/a Subroutinesub 0.0% 0 / 1 Podpod n/a totaltotal 0.0% 0 / 38 CC 1 SCAR 6.9
CC
1
Cov
0%
BEGIN
2.0
CRAP 2.0
1 # Generated by default/object.tt
2 package Paws::MediaConvert::InputTemplate;
3 use Moose;
4 has AudioSelectorGroups => (is => 'ro', isa => 'Paws::MediaConvert::__mapOfAudioSelectorGroup', request_name => 'audioSelectorGroups', traits => ['NameInRequest']);
5 has AudioSelectors => (is => 'ro', isa => 'Paws::MediaConvert::__mapOfAudioSelector', request_name => 'audioSelectors', traits => ['NameInRequest']);
6 has CaptionSelectors => (is => 'ro', isa => 'Paws::MediaConvert::__mapOfCaptionSelector', request_name => 'captionSelectors', traits => ['NameInRequest']);
7 has Crop => (is => 'ro', isa => 'Paws::MediaConvert::Rectangle', request_name => 'crop', traits => ['NameInRequest']);
8 has DeblockFilter => (is => 'ro', isa => 'Str', request_name => 'deblockFilter', traits => ['NameInRequest']);
9 has DenoiseFilter => (is => 'ro', isa => 'Str', request_name => 'denoiseFilter', traits => ['NameInRequest']);
10 has FilterEnable => (is => 'ro', isa => 'Str', request_name => 'filterEnable', traits => ['NameInRequest']);
11 has FilterStrength => (is => 'ro', isa => 'Int', request_name => 'filterStrength', traits => ['NameInRequest']);
12 has ImageInserter => (is => 'ro', isa => 'Paws::MediaConvert::ImageInserter', request_name => 'imageInserter', traits => ['NameInRequest']);
13 has InputClippings => (is => 'ro', isa => 'ArrayRef[Paws::MediaConvert::InputClipping]', request_name => 'inputClippings', traits => ['NameInRequest']);
14 has InputScanType => (is => 'ro', isa => 'Str', request_name => 'inputScanType', traits => ['NameInRequest']);
15 has Position => (is => 'ro', isa => 'Paws::MediaConvert::Rectangle', request_name => 'position', traits => ['NameInRequest']);
16 has ProgramNumber => (is => 'ro', isa => 'Int', request_name => 'programNumber', traits => ['NameInRequest']);
17 has PsiControl => (is => 'ro', isa => 'Str', request_name => 'psiControl', traits => ['NameInRequest']);
18 has TimecodeSource => (is => 'ro', isa => 'Str', request_name => 'timecodeSource', traits => ['NameInRequest']);
19 has TimecodeStart => (is => 'ro', isa => 'Str', request_name => 'timecodeStart', traits => ['NameInRequest']);
20 has VideoSelector => (is => 'ro', isa => 'Paws::MediaConvert::VideoSelector', request_name => 'videoSelector', traits => ['NameInRequest']);
21  
22 1;
23  
24 ### main pod documentation begin ###
25  
26 =head1 NAME
27  
28 Paws::MediaConvert::InputTemplate
29  
30 =head1 USAGE
31  
32 This class represents one of two things:
33  
34 =head3 Arguments in a call to a service
35  
36 Use the attributes of this class as arguments to methods. You shouldn't make instances of this class.
37 Each attribute should be used as a named argument in the calls that expect this type of object.
38  
39 As an example, if Att1 is expected to be a Paws::MediaConvert::InputTemplate object:
40  
41 $service_obj->Method(Att1 => { AudioSelectorGroups => $value, ..., VideoSelector => $value });
42  
43 =head3 Results returned from an API call
44  
45 Use accessors for each attribute. If Att1 is expected to be an Paws::MediaConvert::InputTemplate object:
46  
47 $result = $service_obj->Method(...);
48 $result->Att1->AudioSelectorGroups
49  
50 =head1 DESCRIPTION
51  
52 Specified video input in a template.
53  
54 =head1 ATTRIBUTES
55  
56  
57 =head2 AudioSelectorGroups => L<Paws::MediaConvert::__mapOfAudioSelectorGroup>
58  
59 Use audio selector groups to combine multiple sidecar audio inputs so
60 that you can assign them to a single output audio tab
61 (AudioDescription). Note that, if you're working with embedded audio,
62 it's simpler to assign multiple input tracks into a single audio
63 selector rather than use an audio selector group.
64  
65  
66 =head2 AudioSelectors => L<Paws::MediaConvert::__mapOfAudioSelector>
67  
68 Use Audio selectors (AudioSelectors) to specify a track or set of
69 tracks from the input that you will use in your outputs. You can use
70 multiple Audio selectors per input.
71  
72  
73 =head2 CaptionSelectors => L<Paws::MediaConvert::__mapOfCaptionSelector>
74  
75 Use captions selectors to specify the captions data from your input
76 that you use in your outputs. You can use up to 20 captions selectors
77 per input.
78  
79  
80 =head2 Crop => L<Paws::MediaConvert::Rectangle>
81  
82 Use Cropping selection (crop) to specify the video area that the
83 service will include in the output video frame. If you specify a value
84 here, it will override any value that you specify in the output setting
85 Cropping selection (crop).
86  
87  
88 =head2 DeblockFilter => Str
89  
90 Enable Deblock (InputDeblockFilter) to produce smoother motion in the
91 output. Default is disabled. Only manually controllable for MPEG2 and
92 uncompressed video inputs.
93  
94  
95 =head2 DenoiseFilter => Str
96  
97 Enable Denoise (InputDenoiseFilter) to filter noise from the input.
98 Default is disabled. Only applicable to MPEG2, H.264, H.265, and
99 uncompressed video inputs.
100  
101  
102 =head2 FilterEnable => Str
103  
104 Specify how the transcoding service applies the denoise and deblock
105 filters. You must also enable the filters separately, with Denoise
106 (InputDenoiseFilter) and Deblock (InputDeblockFilter). * Auto - The
107 transcoding service determines whether to apply filtering, depending on
108 input type and quality. * Disable - The input is not filtered. This is
109 true even if you use the API to enable them in (InputDeblockFilter) and
110 (InputDeblockFilter). * Force - The input is filtered regardless of
111 input type.
112  
113  
114 =head2 FilterStrength => Int
115  
116 Use Filter strength (FilterStrength) to adjust the magnitude the input
117 filter settings (Deblock and Denoise). The range is -5 to 5. Default is
118 0.
119  
120  
121 =head2 ImageInserter => L<Paws::MediaConvert::ImageInserter>
122  
123 Enable the image inserter feature to include a graphic overlay on your
124 video. Enable or disable this feature for each input individually. This
125 setting is disabled by default.
126  
127  
128 =head2 InputClippings => ArrayRef[L<Paws::MediaConvert::InputClipping>]
129  
130 (InputClippings) contains sets of start and end times that together
131 specify a portion of the input to be used in the outputs. If you
132 provide only a start time, the clip will be the entire input from that
133 point to the end. If you provide only an end time, it will be the
134 entire input up to that point. When you specify more than one input
135 clip, the transcoding service creates the job outputs by stringing the
136 clips together in the order you specify them.
137  
138  
139 =head2 InputScanType => Str
140  
141 When you have a progressive segmented frame (PsF) input, use this
142 setting to flag the input as PsF. MediaConvert doesn't automatically
143 detect PsF. Therefore, flagging your input as PsF results in better
144 preservation of video quality when you do deinterlacing and frame rate
145 conversion. If you don't specify, the default value is Auto (AUTO).
146 Auto is the correct setting for all inputs that are not PsF. Don't set
147 this value to PsF when your input is interlaced. Doing so creates
148 horizontal interlacing artifacts.
149  
150  
151 =head2 Position => L<Paws::MediaConvert::Rectangle>
152  
153 Use Selection placement (position) to define the video area in your
154 output frame. The area outside of the rectangle that you specify here
155 is black. If you specify a value here, it will override any value that
156 you specify in the output setting Selection placement (position). If
157 you specify a value here, this will override any AFD values in your
158 input, even if you set Respond to AFD (RespondToAfd) to Respond
159 (RESPOND). If you specify a value here, this will ignore anything that
160 you specify for the setting Scaling Behavior (scalingBehavior).
161  
162  
163 =head2 ProgramNumber => Int
164  
165 Use Program (programNumber) to select a specific program from within a
166 multi-program transport stream. Note that Quad 4K is not currently
167 supported. Default is the first program within the transport stream. If
168 the program you specify doesn't exist, the transcoding service will use
169 this default.
170  
171  
172 =head2 PsiControl => Str
173  
174 Set PSI control (InputPsiControl) for transport stream inputs to
175 specify which data the demux process to scans. * Ignore PSI - Scan all
176 PIDs for audio and video. * Use PSI - Scan only PSI data.
177  
178  
179 =head2 TimecodeSource => Str
180  
181 Use this Timecode source setting, located under the input settings
182 (InputTimecodeSource), to specify how the service counts input video
183 frames. This input frame count affects only the behavior of features
184 that apply to a single input at a time, such as input clipping and
185 synchronizing some captions formats. Choose Embedded (EMBEDDED) to use
186 the timecodes in your input video. Choose Start at zero (ZEROBASED) to
187 start the first frame at zero. Choose Specified start (SPECIFIEDSTART)
188 to start the first frame at the timecode that you specify in the
189 setting Start timecode (timecodeStart). If you don't specify a value
190 for Timecode source, the service will use Embedded by default. For more
191 information about timecodes, see
192 https://docs.aws.amazon.com/console/mediaconvert/timecode.
193  
194  
195 =head2 TimecodeStart => Str
196  
197 Specify the timecode that you want the service to use for this input's
198 initial frame. To use this setting, you must set the Timecode source
199 setting, located under the input settings (InputTimecodeSource), to
200 Specified start (SPECIFIEDSTART). For more information about timecodes,
201 see https://docs.aws.amazon.com/console/mediaconvert/timecode.
202  
203  
204 =head2 VideoSelector => L<Paws::MediaConvert::VideoSelector>
205  
206 Input video selectors contain the video settings for the input. Each of
207 your inputs can have up to one video selector.
208  
209  
210  
211 =head1 SEE ALSO
212  
213 This class forms part of L<Paws>, describing an object used in L<Paws::MediaConvert>
214  
215 =head1 BUGS and CONTRIBUTIONS
216  
217 The source code is located here: L<https://github.com/pplu/aws-sdk-perl>
218  
219 Please report bugs to: L<https://github.com/pplu/aws-sdk-perl/issues>
220  
221 =cut
222