blib/lib/Paws/MediaConvert/H264Settings.pm untested

filter: Statementstmt 0.0% 0 / 83 Branchbran n/a Conditioncond n/a MC/DCmcdc n/a Subroutinesub 0.0% 0 / 1 Podpod n/a totaltotal 0.0% 0 / 84 CC 1 SCAR 6.9
CC
1
Cov
0%
BEGIN
2.0
CRAP 2.0
1 # Generated by default/object.tt
2 package Paws::MediaConvert::H264Settings;
3 use Moose;
4 has AdaptiveQuantization => (is => 'ro', isa => 'Str', request_name => 'adaptiveQuantization', traits => ['NameInRequest']);
5 has Bitrate => (is => 'ro', isa => 'Int', request_name => 'bitrate', traits => ['NameInRequest']);
6 has CodecLevel => (is => 'ro', isa => 'Str', request_name => 'codecLevel', traits => ['NameInRequest']);
7 has CodecProfile => (is => 'ro', isa => 'Str', request_name => 'codecProfile', traits => ['NameInRequest']);
8 has DynamicSubGop => (is => 'ro', isa => 'Str', request_name => 'dynamicSubGop', traits => ['NameInRequest']);
9 has EntropyEncoding => (is => 'ro', isa => 'Str', request_name => 'entropyEncoding', traits => ['NameInRequest']);
10 has FieldEncoding => (is => 'ro', isa => 'Str', request_name => 'fieldEncoding', traits => ['NameInRequest']);
11 has FlickerAdaptiveQuantization => (is => 'ro', isa => 'Str', request_name => 'flickerAdaptiveQuantization', traits => ['NameInRequest']);
12 has FramerateControl => (is => 'ro', isa => 'Str', request_name => 'framerateControl', traits => ['NameInRequest']);
13 has FramerateConversionAlgorithm => (is => 'ro', isa => 'Str', request_name => 'framerateConversionAlgorithm', traits => ['NameInRequest']);
14 has FramerateDenominator => (is => 'ro', isa => 'Int', request_name => 'framerateDenominator', traits => ['NameInRequest']);
15 has FramerateNumerator => (is => 'ro', isa => 'Int', request_name => 'framerateNumerator', traits => ['NameInRequest']);
16 has GopBReference => (is => 'ro', isa => 'Str', request_name => 'gopBReference', traits => ['NameInRequest']);
17 has GopClosedCadence => (is => 'ro', isa => 'Int', request_name => 'gopClosedCadence', traits => ['NameInRequest']);
18 has GopSize => (is => 'ro', isa => 'Num', request_name => 'gopSize', traits => ['NameInRequest']);
19 has GopSizeUnits => (is => 'ro', isa => 'Str', request_name => 'gopSizeUnits', traits => ['NameInRequest']);
20 has HrdBufferInitialFillPercentage => (is => 'ro', isa => 'Int', request_name => 'hrdBufferInitialFillPercentage', traits => ['NameInRequest']);
21 has HrdBufferSize => (is => 'ro', isa => 'Int', request_name => 'hrdBufferSize', traits => ['NameInRequest']);
22 has InterlaceMode => (is => 'ro', isa => 'Str', request_name => 'interlaceMode', traits => ['NameInRequest']);
23 has MaxBitrate => (is => 'ro', isa => 'Int', request_name => 'maxBitrate', traits => ['NameInRequest']);
24 has MinIInterval => (is => 'ro', isa => 'Int', request_name => 'minIInterval', traits => ['NameInRequest']);
25 has NumberBFramesBetweenReferenceFrames => (is => 'ro', isa => 'Int', request_name => 'numberBFramesBetweenReferenceFrames', traits => ['NameInRequest']);
26 has NumberReferenceFrames => (is => 'ro', isa => 'Int', request_name => 'numberReferenceFrames', traits => ['NameInRequest']);
27 has ParControl => (is => 'ro', isa => 'Str', request_name => 'parControl', traits => ['NameInRequest']);
28 has ParDenominator => (is => 'ro', isa => 'Int', request_name => 'parDenominator', traits => ['NameInRequest']);
29 has ParNumerator => (is => 'ro', isa => 'Int', request_name => 'parNumerator', traits => ['NameInRequest']);
30 has QualityTuningLevel => (is => 'ro', isa => 'Str', request_name => 'qualityTuningLevel', traits => ['NameInRequest']);
31 has QvbrSettings => (is => 'ro', isa => 'Paws::MediaConvert::H264QvbrSettings', request_name => 'qvbrSettings', traits => ['NameInRequest']);
32 has RateControlMode => (is => 'ro', isa => 'Str', request_name => 'rateControlMode', traits => ['NameInRequest']);
33 has RepeatPps => (is => 'ro', isa => 'Str', request_name => 'repeatPps', traits => ['NameInRequest']);
34 has ScanTypeConversionMode => (is => 'ro', isa => 'Str', request_name => 'scanTypeConversionMode', traits => ['NameInRequest']);
35 has SceneChangeDetect => (is => 'ro', isa => 'Str', request_name => 'sceneChangeDetect', traits => ['NameInRequest']);
36 has Slices => (is => 'ro', isa => 'Int', request_name => 'slices', traits => ['NameInRequest']);
37 has SlowPal => (is => 'ro', isa => 'Str', request_name => 'slowPal', traits => ['NameInRequest']);
38 has Softness => (is => 'ro', isa => 'Int', request_name => 'softness', traits => ['NameInRequest']);
39 has SpatialAdaptiveQuantization => (is => 'ro', isa => 'Str', request_name => 'spatialAdaptiveQuantization', traits => ['NameInRequest']);
40 has Syntax => (is => 'ro', isa => 'Str', request_name => 'syntax', traits => ['NameInRequest']);
41 has Telecine => (is => 'ro', isa => 'Str', request_name => 'telecine', traits => ['NameInRequest']);
42 has TemporalAdaptiveQuantization => (is => 'ro', isa => 'Str', request_name => 'temporalAdaptiveQuantization', traits => ['NameInRequest']);
43 has UnregisteredSeiTimecode => (is => 'ro', isa => 'Str', request_name => 'unregisteredSeiTimecode', traits => ['NameInRequest']);
44  
45 1;
46  
47 ### main pod documentation begin ###
48  
49 =head1 NAME
50  
51 Paws::MediaConvert::H264Settings
52  
53 =head1 USAGE
54  
55 This class represents one of two things:
56  
57 =head3 Arguments in a call to a service
58  
59 Use the attributes of this class as arguments to methods. You shouldn't make instances of this class.
60 Each attribute should be used as a named argument in the calls that expect this type of object.
61  
62 As an example, if Att1 is expected to be a Paws::MediaConvert::H264Settings object:
63  
64 $service_obj->Method(Att1 => { AdaptiveQuantization => $value, ..., UnregisteredSeiTimecode => $value });
65  
66 =head3 Results returned from an API call
67  
68 Use accessors for each attribute. If Att1 is expected to be an Paws::MediaConvert::H264Settings object:
69  
70 $result = $service_obj->Method(...);
71 $result->Att1->AdaptiveQuantization
72  
73 =head1 DESCRIPTION
74  
75 Required when you set (Codec) under
76 (VideoDescription)E<gt>(CodecSettings) to the value H_264.
77  
78 =head1 ATTRIBUTES
79  
80  
81 =head2 AdaptiveQuantization => Str
82  
83 Keep the default value, Auto (AUTO), for this setting to have
84 MediaConvert automatically apply the best types of quantization for
85 your video content. When you want to apply your quantization settings
86 manually, you must set H264AdaptiveQuantization to a value other than
87 Auto (AUTO). Use this setting to specify the strength of any adaptive
88 quantization filters that you enable. If you don't want MediaConvert to
89 do any adaptive quantization in this transcode, set Adaptive
90 quantization (H264AdaptiveQuantization) to Off (OFF). Related settings:
91 The value that you choose here applies to the following settings:
92 H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and
93 H264TemporalAdaptiveQuantization.
94  
95  
96 =head2 Bitrate => Int
97  
98 Specify the average bitrate in bits per second. Required for VBR and
99 CBR. For MS Smooth outputs, bitrates must be unique when rounded down
100 to the nearest multiple of 1000.
101  
102  
103 =head2 CodecLevel => Str
104  
105 Specify an H.264 level that is consistent with your output video
106 settings. If you aren't sure what level to specify, choose Auto (AUTO).
107  
108  
109 =head2 CodecProfile => Str
110  
111 H.264 Profile. High 4:2:2 and 10-bit profiles are only available with
112 the AVC-I License.
113  
114  
115 =head2 DynamicSubGop => Str
116  
117 Choose Adaptive to improve subjective video quality for high-motion
118 content. This will cause the service to use fewer B-frames (which infer
119 information based on other frames) for high-motion portions of the
120 video and more B-frames for low-motion portions. The maximum number of
121 B-frames is limited by the value you provide for the setting B frames
122 between reference frames (numberBFramesBetweenReferenceFrames).
123  
124  
125 =head2 EntropyEncoding => Str
126  
127 Entropy encoding mode. Use CABAC (must be in Main or High profile) or
128 CAVLC.
129  
130  
131 =head2 FieldEncoding => Str
132  
133 Keep the default value, PAFF, to have MediaConvert use PAFF encoding
134 for interlaced outputs. Choose Force field (FORCE_FIELD) to disable
135 PAFF encoding and create separate interlaced fields.
136  
137  
138 =head2 FlickerAdaptiveQuantization => Str
139  
140 Only use this setting when you change the default value, AUTO, for the
141 setting H264AdaptiveQuantization. When you keep all defaults, excluding
142 H264AdaptiveQuantization and all other adaptive quantization from your
143 JSON job specification, MediaConvert automatically applies the best
144 types of quantization for your video content. When you set
145 H264AdaptiveQuantization to a value other than AUTO, the default value
146 for H264FlickerAdaptiveQuantization is Disabled (DISABLED). Change this
147 value to Enabled (ENABLED) to reduce I-frame pop. I-frame pop appears
148 as a visual flicker that can arise when the encoder saves bits by
149 copying some macroblocks many times from frame to frame, and then
150 refreshes them at the I-frame. When you enable this setting, the
151 encoder updates these macroblocks slightly more often to smooth out the
152 flicker. To manually enable or disable H264FlickerAdaptiveQuantization,
153 you must set Adaptive quantization (H264AdaptiveQuantization) to a
154 value other than AUTO.
155  
156  
157 =head2 FramerateControl => Str
158  
159 If you are using the console, use the Framerate setting to specify the
160 frame rate for this output. If you want to keep the same frame rate as
161 the input video, choose Follow source. If you want to do frame rate
162 conversion, choose a frame rate from the dropdown list or choose
163 Custom. The framerates shown in the dropdown list are decimal
164 approximations of fractions. If you choose Custom, specify your frame
165 rate as a fraction. If you are creating your transcoding job
166 specification as a JSON file without the console, use FramerateControl
167 to specify which value the service uses for the frame rate for this
168 output. Choose INITIALIZE_FROM_SOURCE if you want the service to use
169 the frame rate from the input. Choose SPECIFIED if you want the service
170 to use the frame rate you specify in the settings FramerateNumerator
171 and FramerateDenominator.
172  
173  
174 =head2 FramerateConversionAlgorithm => Str
175  
176 Choose the method that you want MediaConvert to use when increasing or
177 decreasing the frame rate. We recommend using drop duplicate
178 (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to
179 30 fps. For numerically complex conversions, you can use interpolate
180 (INTERPOLATE) to avoid stutter. This results in a smooth picture, but
181 might introduce undesirable video artifacts. For complex frame rate
182 conversions, especially if your source video has already been converted
183 from its original cadence, use FrameFormer (FRAMEFORMER) to do
184 motion-compensated interpolation. FrameFormer chooses the best
185 conversion method frame by frame. Note that using FrameFormer increases
186 the transcoding time and incurs a significant add-on cost.
187  
188  
189 =head2 FramerateDenominator => Int
190  
191 When you use the API for transcode jobs that use frame rate conversion,
192 specify the frame rate as a fraction. For example, 24000 / 1001 =
193 23.976 fps. Use FramerateDenominator to specify the denominator of this
194 fraction. In this example, use 1001 for the value of
195 FramerateDenominator. When you use the console for transcode jobs that
196 use frame rate conversion, provide the value as a decimal number for
197 Framerate. In this example, specify 23.976.
198  
199  
200 =head2 FramerateNumerator => Int
201  
202 When you use the API for transcode jobs that use frame rate conversion,
203 specify the frame rate as a fraction. For example, 24000 / 1001 =
204 23.976 fps. Use FramerateNumerator to specify the numerator of this
205 fraction. In this example, use 24000 for the value of
206 FramerateNumerator. When you use the console for transcode jobs that
207 use frame rate conversion, provide the value as a decimal number for
208 Framerate. In this example, specify 23.976.
209  
210  
211 =head2 GopBReference => Str
212  
213 If enable, use reference B frames for GOP structures that have B frames
214 E<gt> 1.
215  
216  
217 =head2 GopClosedCadence => Int
218  
219 Frequency of closed GOPs. In streaming applications, it is recommended
220 that this be set to 1 so a decoder joining mid-stream will receive an
221 IDR frame as quickly as possible. Setting this value to 0 will break
222 output segmenting.
223  
224  
225 =head2 GopSize => Num
226  
227 GOP Length (keyframe interval) in frames or seconds. Must be greater
228 than zero.
229  
230  
231 =head2 GopSizeUnits => Str
232  
233 Indicates if the GOP Size in H264 is specified in frames or seconds. If
234 seconds the system will convert the GOP Size into a frame count at run
235 time.
236  
237  
238 =head2 HrdBufferInitialFillPercentage => Int
239  
240 Percentage of the buffer that should initially be filled (HRD buffer
241 model).
242  
243  
244 =head2 HrdBufferSize => Int
245  
246 Size of buffer (HRD buffer model) in bits. For example, enter five
247 megabits as 5000000.
248  
249  
250 =head2 InterlaceMode => Str
251  
252 Choose the scan line type for the output. Keep the default value,
253 Progressive (PROGRESSIVE) to create a progressive output, regardless of
254 the scan type of your input. Use Top field first (TOP_FIELD) or Bottom
255 field first (BOTTOM_FIELD) to create an output that's interlaced with
256 the same field polarity throughout. Use Follow, default top
257 (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to
258 produce outputs with the same field polarity as the source. For jobs
259 that have multiple inputs, the output field polarity might change over
260 the course of the output. Follow behavior depends on the input scan
261 type. If the source is interlaced, the output will be interlaced with
262 the same polarity as the source. If the source is progressive, the
263 output will be interlaced with top field bottom field first, depending
264 on which of the Follow options you choose.
265  
266  
267 =head2 MaxBitrate => Int
268  
269 Maximum bitrate in bits/second. For example, enter five megabits per
270 second as 5000000. Required when Rate control mode is QVBR.
271  
272  
273 =head2 MinIInterval => Int
274  
275 Enforces separation between repeated (cadence) I-frames and I-frames
276 inserted by Scene Change Detection. If a scene change I-frame is within
277 I-interval frames of a cadence I-frame, the GOP is shrunk and/or
278 stretched to the scene change I-frame. GOP stretch requires enabling
279 lookahead as well as setting I-interval. The normal cadence resumes for
280 the next GOP. This setting is only used when Scene Change Detect is
281 enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
282  
283  
284 =head2 NumberBFramesBetweenReferenceFrames => Int
285  
286 Number of B-frames between reference frames.
287  
288  
289 =head2 NumberReferenceFrames => Int
290  
291 Number of reference frames to use. The encoder may use more than
292 requested if using B-frames and/or interlaced encoding.
293  
294  
295 =head2 ParControl => Str
296  
297 Optional. Specify how the service determines the pixel aspect ratio
298 (PAR) for this output. The default behavior, Follow source
299 (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your
300 output. To specify a different PAR in the console, choose any value
301 other than Follow source. To specify a different PAR by editing the
302 JSON job specification, choose SPECIFIED. When you choose SPECIFIED for
303 this setting, you must also specify values for the parNumerator and
304 parDenominator settings.
305  
306  
307 =head2 ParDenominator => Int
308  
309 Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On
310 the console, this corresponds to any value other than Follow source.
311 When you specify an output pixel aspect ratio (PAR) that is different
312 from your input video PAR, provide your output PAR as a ratio. For
313 example, for D1/DV NTSC widescreen, you would specify the ratio 40:33.
314 In this example, the value for parDenominator is 33.
315  
316  
317 =head2 ParNumerator => Int
318  
319 Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On
320 the console, this corresponds to any value other than Follow source.
321 When you specify an output pixel aspect ratio (PAR) that is different
322 from your input video PAR, provide your output PAR as a ratio. For
323 example, for D1/DV NTSC widescreen, you would specify the ratio 40:33.
324 In this example, the value for parNumerator is 40.
325  
326  
327 =head2 QualityTuningLevel => Str
328  
329 Optional. Use Quality tuning level (qualityTuningLevel) to choose how
330 you want to trade off encoding speed for output video quality. The
331 default behavior is faster, lower quality, single-pass encoding.
332  
333  
334 =head2 QvbrSettings => L<Paws::MediaConvert::H264QvbrSettings>
335  
336 Settings for quality-defined variable bitrate encoding with the H.264
337 codec. Required when you set Rate control mode to QVBR. Not valid when
338 you set Rate control mode to a value other than QVBR, or when you don't
339 define Rate control mode.
340  
341  
342 =head2 RateControlMode => Str
343  
344 Use this setting to specify whether this output has a variable bitrate
345 (VBR), constant bitrate (CBR) or quality-defined variable bitrate
346 (QVBR).
347  
348  
349 =head2 RepeatPps => Str
350  
351 Places a PPS header on each encoded picture, even if repeated.
352  
353  
354 =head2 ScanTypeConversionMode => Str
355  
356 Use this setting for interlaced outputs, when your output frame rate is
357 half of your input frame rate. In this situation, choose Optimized
358 interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced
359 output. In this case, each progressive frame from the input corresponds
360 to an interlaced field in the output. Keep the default value, Basic
361 interlacing (INTERLACED), for all other output frame rates. With basic
362 interlacing, MediaConvert performs any frame rate conversion first and
363 then interlaces the frames. When you choose Optimized interlacing and
364 you set your output frame rate to a value that isn't suitable for
365 optimized interlacing, MediaConvert automatically falls back to basic
366 interlacing. Required settings: To use optimized interlacing, you must
367 set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use
368 optimized interlacing for hard telecine outputs. You must also set
369 Interlace mode (interlaceMode) to a value other than Progressive
370 (PROGRESSIVE).
371  
372  
373 =head2 SceneChangeDetect => Str
374  
375 Enable this setting to insert I-frames at scene changes that the
376 service automatically detects. This improves video quality and is
377 enabled by default. If this output uses QVBR, choose Transition
378 detection (TRANSITION_DETECTION) for further video quality improvement.
379 For more information about QVBR, see
380 https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
381  
382  
383 =head2 Slices => Int
384  
385 Number of slices per picture. Must be less than or equal to the number
386 of macroblock rows for progressive pictures, and less than or equal to
387 half the number of macroblock rows for interlaced pictures.
388  
389  
390 =head2 SlowPal => Str
391  
392 Ignore this setting unless your input frame rate is 23.976 or 24 frames
393 per second (fps). Enable slow PAL to create a 25 fps output. When you
394 enable slow PAL, MediaConvert relabels the video frames to 25 fps and
395 resamples your audio to keep it synchronized with the video. Note that
396 enabling this setting will slightly reduce the duration of your video.
397 Required settings: You must also set Framerate to 25. In your JSON job
398 specification, set (framerateControl) to (SPECIFIED),
399 (framerateNumerator) to 25 and (framerateDenominator) to 1.
400  
401  
402 =head2 Softness => Int
403  
404 Ignore this setting unless you need to comply with a specification that
405 requires a specific value. If you don't have a specification
406 requirement, we recommend that you adjust the softness of your output
407 by using a lower value for the setting Sharpness (sharpness) or by
408 enabling a noise reducer filter (noiseReducerFilter). The Softness
409 (softness) setting specifies the quantization matrices that the encoder
410 uses. Keep the default value, 0, for flat quantization. Choose the
411 value 1 or 16 to use the default JVT softening quantization matricies
412 from the H.264 specification. Choose a value from 17 to 128 to use
413 planar interpolation. Increasing values from 17 to 128 result in
414 increasing reduction of high-frequency data. The value 128 results in
415 the softest video.
416  
417  
418 =head2 SpatialAdaptiveQuantization => Str
419  
420 Only use this setting when you change the default value, Auto (AUTO),
421 for the setting H264AdaptiveQuantization. When you keep all defaults,
422 excluding H264AdaptiveQuantization and all other adaptive quantization
423 from your JSON job specification, MediaConvert automatically applies
424 the best types of quantization for your video content. When you set
425 H264AdaptiveQuantization to a value other than AUTO, the default value
426 for H264SpatialAdaptiveQuantization is Enabled (ENABLED). Keep this
427 default value to adjust quantization within each frame based on spatial
428 variation of content complexity. When you enable this feature, the
429 encoder uses fewer bits on areas that can sustain more distortion with
430 no noticeable visual degradation and uses more bits on areas where any
431 small distortion will be noticeable. For example, complex textured
432 blocks are encoded with fewer bits and smooth textured blocks are
433 encoded with more bits. Enabling this feature will almost always
434 improve your video quality. Note, though, that this feature doesn't
435 take into account where the viewer's attention is likely to be. If
436 viewers are likely to be focusing their attention on a part of the
437 screen with a lot of complex texture, you might choose to set
438 H264SpatialAdaptiveQuantization to Disabled (DISABLED). Related
439 setting: When you enable spatial adaptive quantization, set the value
440 for Adaptive quantization (H264AdaptiveQuantization) depending on your
441 content. For homogeneous content, such as cartoons and video games, set
442 it to Low. For content with a wider variety of textures, set it to High
443 or Higher. To manually enable or disable
444 H264SpatialAdaptiveQuantization, you must set Adaptive quantization
445 (H264AdaptiveQuantization) to a value other than AUTO.
446  
447  
448 =head2 Syntax => Str
449  
450 Produces a bitstream compliant with SMPTE RP-2027.
451  
452  
453 =head2 Telecine => Str
454  
455 When you do frame rate conversion from 23.976 frames per second (fps)
456 to 29.97 fps, and your output scan type is interlaced, you can
457 optionally enable hard or soft telecine to create a smoother picture.
458 Hard telecine (HARD) produces a 29.97i output. Soft telecine (SOFT)
459 produces an output with a 23.976 output that signals to the video
460 player device to do the conversion during play back. When you keep the
461 default value, None (NONE), MediaConvert does a standard frame rate
462 conversion to 29.97 without doing anything with the field polarity to
463 create a smoother picture.
464  
465  
466 =head2 TemporalAdaptiveQuantization => Str
467  
468 Only use this setting when you change the default value, AUTO, for the
469 setting H264AdaptiveQuantization. When you keep all defaults, excluding
470 H264AdaptiveQuantization and all other adaptive quantization from your
471 JSON job specification, MediaConvert automatically applies the best
472 types of quantization for your video content. When you set
473 H264AdaptiveQuantization to a value other than AUTO, the default value
474 for H264TemporalAdaptiveQuantization is Enabled (ENABLED). Keep this
475 default value to adjust quantization within each frame based on
476 temporal variation of content complexity. When you enable this feature,
477 the encoder uses fewer bits on areas of the frame that aren't moving
478 and uses more bits on complex objects with sharp edges that move a lot.
479 For example, this feature improves the readability of text tickers on
480 newscasts and scoreboards on sports matches. Enabling this feature will
481 almost always improve your video quality. Note, though, that this
482 feature doesn't take into account where the viewer's attention is
483 likely to be. If viewers are likely to be focusing their attention on a
484 part of the screen that doesn't have moving objects with sharp edges,
485 such as sports athletes' faces, you might choose to set
486 H264TemporalAdaptiveQuantization to Disabled (DISABLED). Related
487 setting: When you enable temporal quantization, adjust the strength of
488 the filter with the setting Adaptive quantization
489 (adaptiveQuantization). To manually enable or disable
490 H264TemporalAdaptiveQuantization, you must set Adaptive quantization
491 (H264AdaptiveQuantization) to a value other than AUTO.
492  
493  
494 =head2 UnregisteredSeiTimecode => Str
495  
496 Inserts timecode for each frame as 4 bytes of an unregistered SEI
497 message.
498  
499  
500  
501 =head1 SEE ALSO
502  
503 This class forms part of L<Paws>, describing an object used in L<Paws::MediaConvert>
504  
505 =head1 BUGS and CONTRIBUTIONS
506  
507 The source code is located here: L<https://github.com/pplu/aws-sdk-perl>
508  
509 Please report bugs to: L<https://github.com/pplu/aws-sdk-perl/issues>
510  
511 =cut
512