« blib/lib/Paws/MediaConvert/Eac3AtmosSettings.pm
↑ Summary
blib/lib/Paws/MediaConvert/EmbeddedDestinationSettings.pm »
| 1 | # Generated by default/object.tt | ||
| 2 | package Paws::MediaConvert::Eac3Settings; | ||
| 3 | use Moose; | ||
| 4 | has AttenuationControl => (is => 'ro', isa => 'Str', request_name => 'attenuationControl', traits => ['NameInRequest']); | ||
| 5 | has Bitrate => (is => 'ro', isa => 'Int', request_name => 'bitrate', traits => ['NameInRequest']); | ||
| 6 | has BitstreamMode => (is => 'ro', isa => 'Str', request_name => 'bitstreamMode', traits => ['NameInRequest']); | ||
| 7 | has CodingMode => (is => 'ro', isa => 'Str', request_name => 'codingMode', traits => ['NameInRequest']); | ||
| 8 | has DcFilter => (is => 'ro', isa => 'Str', request_name => 'dcFilter', traits => ['NameInRequest']); | ||
| 9 | has Dialnorm => (is => 'ro', isa => 'Int', request_name => 'dialnorm', traits => ['NameInRequest']); | ||
| 10 | has DynamicRangeCompressionLine => (is => 'ro', isa => 'Str', request_name => 'dynamicRangeCompressionLine', traits => ['NameInRequest']); | ||
| 11 | has DynamicRangeCompressionRf => (is => 'ro', isa => 'Str', request_name => 'dynamicRangeCompressionRf', traits => ['NameInRequest']); | ||
| 12 | has LfeControl => (is => 'ro', isa => 'Str', request_name => 'lfeControl', traits => ['NameInRequest']); | ||
| 13 | has LfeFilter => (is => 'ro', isa => 'Str', request_name => 'lfeFilter', traits => ['NameInRequest']); | ||
| 14 | has LoRoCenterMixLevel => (is => 'ro', isa => 'Num', request_name => 'loRoCenterMixLevel', traits => ['NameInRequest']); | ||
| 15 | has LoRoSurroundMixLevel => (is => 'ro', isa => 'Num', request_name => 'loRoSurroundMixLevel', traits => ['NameInRequest']); | ||
| 16 | has LtRtCenterMixLevel => (is => 'ro', isa => 'Num', request_name => 'ltRtCenterMixLevel', traits => ['NameInRequest']); | ||
| 17 | has LtRtSurroundMixLevel => (is => 'ro', isa => 'Num', request_name => 'ltRtSurroundMixLevel', traits => ['NameInRequest']); | ||
| 18 | has MetadataControl => (is => 'ro', isa => 'Str', request_name => 'metadataControl', traits => ['NameInRequest']); | ||
| 19 | has PassthroughControl => (is => 'ro', isa => 'Str', request_name => 'passthroughControl', traits => ['NameInRequest']); | ||
| 20 | has PhaseControl => (is => 'ro', isa => 'Str', request_name => 'phaseControl', traits => ['NameInRequest']); | ||
| 21 | has SampleRate => (is => 'ro', isa => 'Int', request_name => 'sampleRate', traits => ['NameInRequest']); | ||
| 22 | has StereoDownmix => (is => 'ro', isa => 'Str', request_name => 'stereoDownmix', traits => ['NameInRequest']); | ||
| 23 | has SurroundExMode => (is => 'ro', isa => 'Str', request_name => 'surroundExMode', traits => ['NameInRequest']); | ||
| 24 | has SurroundMode => (is => 'ro', isa => 'Str', request_name => 'surroundMode', traits => ['NameInRequest']); | ||
| 25 | |||
| 26 | 1; | ||
| 27 | |||
| 28 | ### main pod documentation begin ### | ||
| 29 | |||
| 30 | =head1 NAME | ||
| 31 | |||
| 32 | Paws::MediaConvert::Eac3Settings | ||
| 33 | |||
| 34 | =head1 USAGE | ||
| 35 | |||
| 36 | This class represents one of two things: | ||
| 37 | |||
| 38 | =head3 Arguments in a call to a service | ||
| 39 | |||
| 40 | Use the attributes of this class as arguments to methods. You shouldn't make instances of this class. | ||
| 41 | Each attribute should be used as a named argument in the calls that expect this type of object. | ||
| 42 | |||
| 43 | As an example, if Att1 is expected to be a Paws::MediaConvert::Eac3Settings object: | ||
| 44 | |||
| 45 | $service_obj->Method(Att1 => { AttenuationControl => $value, ..., SurroundMode => $value }); | ||
| 46 | |||
| 47 | =head3 Results returned from an API call | ||
| 48 | |||
| 49 | Use accessors for each attribute. If Att1 is expected to be an Paws::MediaConvert::Eac3Settings object: | ||
| 50 | |||
| 51 | $result = $service_obj->Method(...); | ||
| 52 | $result->Att1->AttenuationControl | ||
| 53 | |||
| 54 | =head1 DESCRIPTION | ||
| 55 | |||
| 56 | Required when you set (Codec) under | ||
| 57 | (AudioDescriptions)E<gt>(CodecSettings) to the value EAC3. | ||
| 58 | |||
| 59 | =head1 ATTRIBUTES | ||
| 60 | |||
| 61 | |||
| 62 | =head2 AttenuationControl => Str | ||
| 63 | |||
| 64 | If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround | ||
| 65 | channels. Only used for 3/2 coding mode. | ||
| 66 | |||
| 67 | |||
| 68 | =head2 Bitrate => Int | ||
| 69 | |||
| 70 | Specify the average bitrate in bits per second. Valid bitrates depend | ||
| 71 | on the coding mode. | ||
| 72 | |||
| 73 | |||
| 74 | =head2 BitstreamMode => Str | ||
| 75 | |||
| 76 | Specify the bitstream mode for the E-AC-3 stream that the encoder | ||
| 77 | emits. For more information about the EAC3 bitstream mode, see ATSC | ||
| 78 | A/52-2012 (Annex E). | ||
| 79 | |||
| 80 | |||
| 81 | =head2 CodingMode => Str | ||
| 82 | |||
| 83 | Dolby Digital Plus coding mode. Determines number of channels. | ||
| 84 | |||
| 85 | |||
| 86 | =head2 DcFilter => Str | ||
| 87 | |||
| 88 | Activates a DC highpass filter for all input channels. | ||
| 89 | |||
| 90 | |||
| 91 | =head2 Dialnorm => Int | ||
| 92 | |||
| 93 | Sets the dialnorm for the output. If blank and input audio is Dolby | ||
| 94 | Digital Plus, dialnorm will be passed through. | ||
| 95 | |||
| 96 | |||
| 97 | =head2 DynamicRangeCompressionLine => Str | ||
| 98 | |||
| 99 | Choose the Dolby Digital dynamic range control (DRC) profile that | ||
| 100 | MediaConvert uses when encoding the metadata in the Dolby Digital | ||
| 101 | stream for the line operating mode. Related setting: When you use this | ||
| 102 | setting, MediaConvert ignores any value you provide for Dynamic range | ||
| 103 | compression profile (DynamicRangeCompressionProfile). For information | ||
| 104 | about the Dolby Digital DRC operating modes and profiles, see the | ||
| 105 | Dynamic Range Control chapter of the Dolby Metadata Guide at | ||
| 106 | https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf. | ||
| 107 | |||
| 108 | |||
| 109 | =head2 DynamicRangeCompressionRf => Str | ||
| 110 | |||
| 111 | Choose the Dolby Digital dynamic range control (DRC) profile that | ||
| 112 | MediaConvert uses when encoding the metadata in the Dolby Digital | ||
| 113 | stream for the RF operating mode. Related setting: When you use this | ||
| 114 | setting, MediaConvert ignores any value you provide for Dynamic range | ||
| 115 | compression profile (DynamicRangeCompressionProfile). For information | ||
| 116 | about the Dolby Digital DRC operating modes and profiles, see the | ||
| 117 | Dynamic Range Control chapter of the Dolby Metadata Guide at | ||
| 118 | https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf. | ||
| 119 | |||
| 120 | |||
| 121 | =head2 LfeControl => Str | ||
| 122 | |||
| 123 | When encoding 3/2 audio, controls whether the LFE channel is enabled | ||
| 124 | |||
| 125 | |||
| 126 | =head2 LfeFilter => Str | ||
| 127 | |||
| 128 | Applies a 120Hz lowpass filter to the LFE channel prior to encoding. | ||
| 129 | Only valid with 3_2_LFE coding mode. | ||
| 130 | |||
| 131 | |||
| 132 | =head2 LoRoCenterMixLevel => Num | ||
| 133 | |||
| 134 | Specify a value for the following Dolby Digital Plus setting: Left | ||
| 135 | only/Right only center mix (Lo/Ro center). MediaConvert uses this value | ||
| 136 | for downmixing. How the service uses this value depends on the value | ||
| 137 | that you choose for Stereo downmix (Eac3StereoDownmix). Valid values: | ||
| 138 | 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the | ||
| 139 | channel. This setting applies only if you keep the default value of 3/2 | ||
| 140 | - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode | ||
| 141 | (Eac3CodingMode). If you choose a different value for Coding mode, the | ||
| 142 | service ignores Left only/Right only center (loRoCenterMixLevel). | ||
| 143 | |||
| 144 | |||
| 145 | =head2 LoRoSurroundMixLevel => Num | ||
| 146 | |||
| 147 | Specify a value for the following Dolby Digital Plus setting: Left | ||
| 148 | only/Right only (Lo/Ro surround). MediaConvert uses this value for | ||
| 149 | downmixing. How the service uses this value depends on the value that | ||
| 150 | you choose for Stereo downmix (Eac3StereoDownmix). Valid values: -1.5, | ||
| 151 | -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This | ||
| 152 | setting applies only if you keep the default value of 3/2 - L, R, C, | ||
| 153 | Ls, Rs (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). | ||
| 154 | If you choose a different value for Coding mode, the service ignores | ||
| 155 | Left only/Right only surround (loRoSurroundMixLevel). | ||
| 156 | |||
| 157 | |||
| 158 | =head2 LtRtCenterMixLevel => Num | ||
| 159 | |||
| 160 | Specify a value for the following Dolby Digital Plus setting: Left | ||
| 161 | total/Right total center mix (Lt/Rt center). MediaConvert uses this | ||
| 162 | value for downmixing. How the service uses this value depends on the | ||
| 163 | value that you choose for Stereo downmix (Eac3StereoDownmix). Valid | ||
| 164 | values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 | ||
| 165 | mutes the channel. This setting applies only if you keep the default | ||
| 166 | value of 3/2 - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding | ||
| 167 | mode (Eac3CodingMode). If you choose a different value for Coding mode, | ||
| 168 | the service ignores Left total/Right total center (ltRtCenterMixLevel). | ||
| 169 | |||
| 170 | |||
| 171 | =head2 LtRtSurroundMixLevel => Num | ||
| 172 | |||
| 173 | Specify a value for the following Dolby Digital Plus setting: Left | ||
| 174 | total/Right total surround mix (Lt/Rt surround). MediaConvert uses this | ||
| 175 | value for downmixing. How the service uses this value depends on the | ||
| 176 | value that you choose for Stereo downmix (Eac3StereoDownmix). Valid | ||
| 177 | values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the | ||
| 178 | channel. This setting applies only if you keep the default value of 3/2 | ||
| 179 | - L, R, C, Ls, Rs (CODING_MODE_3_2) for the setting Coding mode | ||
| 180 | (Eac3CodingMode). If you choose a different value for Coding mode, the | ||
| 181 | service ignores Left total/Right total surround (ltRtSurroundMixLevel). | ||
| 182 | |||
| 183 | |||
| 184 | =head2 MetadataControl => Str | ||
| 185 | |||
| 186 | When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, | ||
| 187 | DD+, or DolbyE decoder that supplied this audio data. If audio was not | ||
| 188 | supplied from one of these streams, then the static metadata settings | ||
| 189 | will be used. | ||
| 190 | |||
| 191 | |||
| 192 | =head2 PassthroughControl => Str | ||
| 193 | |||
| 194 | When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it | ||
| 195 | is present on the input. this detection is dynamic over the life of the | ||
| 196 | transcode. Inputs that alternate between DD+ and non-DD+ content will | ||
| 197 | have a consistent DD+ output as the system alternates between | ||
| 198 | passthrough and encoding. | ||
| 199 | |||
| 200 | |||
| 201 | =head2 PhaseControl => Str | ||
| 202 | |||
| 203 | Controls the amount of phase-shift applied to the surround channels. | ||
| 204 | Only used for 3/2 coding mode. | ||
| 205 | |||
| 206 | |||
| 207 | =head2 SampleRate => Int | ||
| 208 | |||
| 209 | This value is always 48000. It represents the sample rate in Hz. | ||
| 210 | |||
| 211 | |||
| 212 | =head2 StereoDownmix => Str | ||
| 213 | |||
| 214 | Choose how the service does stereo downmixing. This setting only | ||
| 215 | applies if you keep the default value of 3/2 - L, R, C, Ls, Rs | ||
| 216 | (CODING_MODE_3_2) for the setting Coding mode (Eac3CodingMode). If you | ||
| 217 | choose a different value for Coding mode, the service ignores Stereo | ||
| 218 | downmix (Eac3StereoDownmix). | ||
| 219 | |||
| 220 | |||
| 221 | =head2 SurroundExMode => Str | ||
| 222 | |||
| 223 | When encoding 3/2 audio, sets whether an extra center back surround | ||
| 224 | channel is matrix encoded into the left and right surround channels. | ||
| 225 | |||
| 226 | |||
| 227 | =head2 SurroundMode => Str | ||
| 228 | |||
| 229 | When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded | ||
| 230 | into the two channels. | ||
| 231 | |||
| 232 | |||
| 233 | |||
| 234 | =head1 SEE ALSO | ||
| 235 | |||
| 236 | This class forms part of L<Paws>, describing an object used in L<Paws::MediaConvert> | ||
| 237 | |||
| 238 | =head1 BUGS and CONTRIBUTIONS | ||
| 239 | |||
| 240 | The source code is located here: L<https://github.com/pplu/aws-sdk-perl> | ||
| 241 | |||
| 242 | Please report bugs to: L<https://github.com/pplu/aws-sdk-perl/issues> | ||
| 243 | |||
| 244 | =cut | ||
| 245 |