blib/lib/Paws/MediaConvert/AvcIntraSettings.pm untested

filter: Statementstmt 0.0% 0 / 23 Branchbran n/a Conditioncond n/a MC/DCmcdc n/a Subroutinesub 0.0% 0 / 1 Podpod n/a totaltotal 0.0% 0 / 24 CC 1 SCAR 6.9
CC
1
Cov
0%
BEGIN
2.0
CRAP 2.0
1 # Generated by default/object.tt
2 package Paws::MediaConvert::AvcIntraSettings;
3 use Moose;
4 has AvcIntraClass => (is => 'ro', isa => 'Str', request_name => 'avcIntraClass', traits => ['NameInRequest']);
5 has AvcIntraUhdSettings => (is => 'ro', isa => 'Paws::MediaConvert::AvcIntraUhdSettings', request_name => 'avcIntraUhdSettings', traits => ['NameInRequest']);
6 has FramerateControl => (is => 'ro', isa => 'Str', request_name => 'framerateControl', traits => ['NameInRequest']);
7 has FramerateConversionAlgorithm => (is => 'ro', isa => 'Str', request_name => 'framerateConversionAlgorithm', traits => ['NameInRequest']);
8 has FramerateDenominator => (is => 'ro', isa => 'Int', request_name => 'framerateDenominator', traits => ['NameInRequest']);
9 has FramerateNumerator => (is => 'ro', isa => 'Int', request_name => 'framerateNumerator', traits => ['NameInRequest']);
10 has InterlaceMode => (is => 'ro', isa => 'Str', request_name => 'interlaceMode', traits => ['NameInRequest']);
11 has ScanTypeConversionMode => (is => 'ro', isa => 'Str', request_name => 'scanTypeConversionMode', traits => ['NameInRequest']);
12 has SlowPal => (is => 'ro', isa => 'Str', request_name => 'slowPal', traits => ['NameInRequest']);
13 has Telecine => (is => 'ro', isa => 'Str', request_name => 'telecine', traits => ['NameInRequest']);
14  
15 1;
16  
17 ### main pod documentation begin ###
18  
19 =head1 NAME
20  
21 Paws::MediaConvert::AvcIntraSettings
22  
23 =head1 USAGE
24  
25 This class represents one of two things:
26  
27 =head3 Arguments in a call to a service
28  
29 Use the attributes of this class as arguments to methods. You shouldn't make instances of this class.
30 Each attribute should be used as a named argument in the calls that expect this type of object.
31  
32 As an example, if Att1 is expected to be a Paws::MediaConvert::AvcIntraSettings object:
33  
34 $service_obj->Method(Att1 => { AvcIntraClass => $value, ..., Telecine => $value });
35  
36 =head3 Results returned from an API call
37  
38 Use accessors for each attribute. If Att1 is expected to be an Paws::MediaConvert::AvcIntraSettings object:
39  
40 $result = $service_obj->Method(...);
41 $result->Att1->AvcIntraClass
42  
43 =head1 DESCRIPTION
44  
45 Required when you choose AVC-Intra for your output video codec. For
46 more information about the AVC-Intra settings, see the relevant
47 specification. For detailed information about SD and HD in AVC-Intra,
48 see https://ieeexplore.ieee.org/document/7290936. For information about
49 4K/2K in AVC-Intra, see
50 https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.
51  
52 =head1 ATTRIBUTES
53  
54  
55 =head2 AvcIntraClass => Str
56  
57 Specify the AVC-Intra class of your output. The AVC-Intra class
58 selection determines the output video bit rate depending on the frame
59 rate of the output. Outputs with higher class values have higher
60 bitrates and improved image quality. Note that for Class 4K/2K,
61 MediaConvert supports only 4:2:2 chroma subsampling.
62  
63  
64 =head2 AvcIntraUhdSettings => L<Paws::MediaConvert::AvcIntraUhdSettings>
65  
66 Optional when you set AVC-Intra class (avcIntraClass) to Class 4K/2K
67 (CLASS_4K_2K). When you set AVC-Intra class to a different value, this
68 object isn't allowed.
69  
70  
71 =head2 FramerateControl => Str
72  
73 If you are using the console, use the Framerate setting to specify the
74 frame rate for this output. If you want to keep the same frame rate as
75 the input video, choose Follow source. If you want to do frame rate
76 conversion, choose a frame rate from the dropdown list or choose
77 Custom. The framerates shown in the dropdown list are decimal
78 approximations of fractions. If you choose Custom, specify your frame
79 rate as a fraction. If you are creating your transcoding job
80 specification as a JSON file without the console, use FramerateControl
81 to specify which value the service uses for the frame rate for this
82 output. Choose INITIALIZE_FROM_SOURCE if you want the service to use
83 the frame rate from the input. Choose SPECIFIED if you want the service
84 to use the frame rate you specify in the settings FramerateNumerator
85 and FramerateDenominator.
86  
87  
88 =head2 FramerateConversionAlgorithm => Str
89  
90 Choose the method that you want MediaConvert to use when increasing or
91 decreasing the frame rate. We recommend using drop duplicate
92 (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to
93 30 fps. For numerically complex conversions, you can use interpolate
94 (INTERPOLATE) to avoid stutter. This results in a smooth picture, but
95 might introduce undesirable video artifacts. For complex frame rate
96 conversions, especially if your source video has already been converted
97 from its original cadence, use FrameFormer (FRAMEFORMER) to do
98 motion-compensated interpolation. FrameFormer chooses the best
99 conversion method frame by frame. Note that using FrameFormer increases
100 the transcoding time and incurs a significant add-on cost.
101  
102  
103 =head2 FramerateDenominator => Int
104  
105 When you use the API for transcode jobs that use frame rate conversion,
106 specify the frame rate as a fraction. For example, 24000 / 1001 =
107 23.976 fps. Use FramerateDenominator to specify the denominator of this
108 fraction. In this example, use 1001 for the value of
109 FramerateDenominator. When you use the console for transcode jobs that
110 use frame rate conversion, provide the value as a decimal number for
111 Framerate. In this example, specify 23.976.
112  
113  
114 =head2 FramerateNumerator => Int
115  
116 When you use the API for transcode jobs that use frame rate conversion,
117 specify the frame rate as a fraction. For example, 24000 / 1001 =
118 23.976 fps. Use FramerateNumerator to specify the numerator of this
119 fraction. In this example, use 24000 for the value of
120 FramerateNumerator. When you use the console for transcode jobs that
121 use frame rate conversion, provide the value as a decimal number for
122 Framerate. In this example, specify 23.976.
123  
124  
125 =head2 InterlaceMode => Str
126  
127 Choose the scan line type for the output. Keep the default value,
128 Progressive (PROGRESSIVE) to create a progressive output, regardless of
129 the scan type of your input. Use Top field first (TOP_FIELD) or Bottom
130 field first (BOTTOM_FIELD) to create an output that's interlaced with
131 the same field polarity throughout. Use Follow, default top
132 (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD) to
133 produce outputs with the same field polarity as the source. For jobs
134 that have multiple inputs, the output field polarity might change over
135 the course of the output. Follow behavior depends on the input scan
136 type. If the source is interlaced, the output will be interlaced with
137 the same polarity as the source. If the source is progressive, the
138 output will be interlaced with top field bottom field first, depending
139 on which of the Follow options you choose.
140  
141  
142 =head2 ScanTypeConversionMode => Str
143  
144 Use this setting for interlaced outputs, when your output frame rate is
145 half of your input frame rate. In this situation, choose Optimized
146 interlacing (INTERLACED_OPTIMIZE) to create a better quality interlaced
147 output. In this case, each progressive frame from the input corresponds
148 to an interlaced field in the output. Keep the default value, Basic
149 interlacing (INTERLACED), for all other output frame rates. With basic
150 interlacing, MediaConvert performs any frame rate conversion first and
151 then interlaces the frames. When you choose Optimized interlacing and
152 you set your output frame rate to a value that isn't suitable for
153 optimized interlacing, MediaConvert automatically falls back to basic
154 interlacing. Required settings: To use optimized interlacing, you must
155 set Telecine (telecine) to None (NONE) or Soft (SOFT). You can't use
156 optimized interlacing for hard telecine outputs. You must also set
157 Interlace mode (interlaceMode) to a value other than Progressive
158 (PROGRESSIVE).
159  
160  
161 =head2 SlowPal => Str
162  
163 Ignore this setting unless your input frame rate is 23.976 or 24 frames
164 per second (fps). Enable slow PAL to create a 25 fps output. When you
165 enable slow PAL, MediaConvert relabels the video frames to 25 fps and
166 resamples your audio to keep it synchronized with the video. Note that
167 enabling this setting will slightly reduce the duration of your video.
168 Required settings: You must also set Framerate to 25. In your JSON job
169 specification, set (framerateControl) to (SPECIFIED),
170 (framerateNumerator) to 25 and (framerateDenominator) to 1.
171  
172  
173 =head2 Telecine => Str
174  
175 When you do frame rate conversion from 23.976 frames per second (fps)
176 to 29.97 fps, and your output scan type is interlaced, you can
177 optionally enable hard telecine (HARD) to create a smoother picture.
178 When you keep the default value, None (NONE), MediaConvert does a
179 standard frame rate conversion to 29.97 without doing anything with the
180 field polarity to create a smoother picture.
181  
182  
183  
184 =head1 SEE ALSO
185  
186 This class forms part of L<Paws>, describing an object used in L<Paws::MediaConvert>
187  
188 =head1 BUGS and CONTRIBUTIONS
189  
190 The source code is located here: L<https://github.com/pplu/aws-sdk-perl>
191  
192 Please report bugs to: L<https://github.com/pplu/aws-sdk-perl/issues>
193  
194 =cut
195