File Coverage

/usr/local/lib/perl5/site_perl/5.26.1/x86_64-linux/XS/libgeos.x/i/geos/operation/linemerge/LineSequencer.h

Criterion	Covered	Total	%
statement	18	19	94.7
branch	6	12	50.0
condition			n/a
subroutine			n/a
pod			n/a
total	24	31	77.4

/**********************************************************************
 *
 * GEOS - Geometry Engine Open Source
 * http://geos.osgeo.org
 *
 * Copyright (C) 2011 Sandro Santilli
 * Copyright (C) 2006 Refractions Research Inc.
 *
 * This is free software; you can redistribute and/or modify it under
 * the terms of the GNU Lesser General Public Licence as published
 * by the Free Software Foundation.
 * See the COPYING file for more information.
 *
 **********************************************************************
 *
 * Last port: operation/linemerge/LineSequencer.java r378 (JTS-1.12)
 *
 **********************************************************************/

#ifndef GEOS_OP_LINEMERGE_LINESEQUENCER_H
#define GEOS_OP_LINEMERGE_LINESEQUENCER_H

#include

#include  // for composition
#include  // for inlines
#include  // for inlines

#include
#include
#include  // for unique_ptr

#ifdef _MSC_VER
#pragma warning(push)
#pragma warning(disable: 4251) // warning C4251: needs to have dll-interface to be used by clients of class
#endif

// Forward declarations
namespace geos {
	namespace geom {
		class GeometryFactory;
		class Geometry;
		class LineString;
	}
	namespace planargraph {
		class DirectedEdge;
		class Subgraph;
		class Node;
	}
}


namespace geos {
namespace operation { // geos::operation
namespace linemerge { // geos::operation::linemerge

/** \brief
 * Builds a sequence from a set of LineStrings so that
 * they are ordered end to end.
 *
 * A sequence is a complete non-repeating list of the linear
 * components of the input.  Each linestring is oriented
 * so that identical endpoints are adjacent in the list.
 *
 * A typical use case is to convert a set of
 * unoriented geometric links
 * from a linear network
 * (e.g. such as block faces on a bus route)
 * into a continuous oriented path through the network.
 *
 * The input linestrings may form one or more connected sets.
 * The input linestrings should be correctly noded, or the results may
 * not be what is expected.
 * The computed output is a single MultiLineString containing the ordered
 * linestrings in the sequence.
 *
 * The sequencing employs the classic Eulerian path graph algorithm.
 * Since Eulerian paths are not uniquely determined,
 * further rules are used to
 * make the computed sequence preserve as much as possible of the input
 * ordering.
 * Within a connected subset of lines, the ordering rules are:
 *
 * - If there is degree-1 node which is the start
 *   node of an linestring, use that node as the start of the sequence
 * - If there is a degree-1 node which is the end
 *   node of an linestring, use that node as the end of the sequence
 * - If the sequence has no degree-1 nodes, use any node as the start
 *
 * Note that not all arrangements of lines can be sequenced.
 * For a connected set of edges in a graph,
 * Euler's Theorem states that there is a sequence
 * containing each edge once
 * if and only if there are no more than 2 nodes of odd degree.
 * If it is not possible to find a sequence, the isSequenceable method
 * will return false.
 *
 */
class GEOS_DLL LineSequencer {

private:
	typedef std::list DirEdgeList;
	typedef std::vector< DirEdgeList* > Sequences;

	LineMergeGraph graph;
	const geom::GeometryFactory *factory;
	unsigned int lineCount;
	bool isRun;
	std::unique_ptr sequencedGeometry;
	bool isSequenceableVar;

	void addLine(const geom::LineString *lineString);
	void computeSequence();
	Sequences* findSequences();
	DirEdgeList* findSequence(planargraph::Subgraph& graph);

	void delAll( Sequences& );

	/// return a newly allocated LineString
	static geom::LineString* reverse(const geom::LineString *line);

	/**
	 * Builds a geometry ({@link LineString} or {@link MultiLineString} )
	 * representing the sequence.
	 *
	 * @param sequences
	 *    a vector of vectors of const planarDirectedEdges
	 *    with LineMergeEdges as their parent edges.
	 *    Ownership of container _and_ contents retained by caller.
	 *
	 * @return the sequenced geometry, possibly NULL
	 *         if no sequence exists
	 */
	geom::Geometry* buildSequencedGeometry(const Sequences& sequences);

	static const planargraph::Node* findLowestDegreeNode(
			const planargraph::Subgraph& graph);

	void addReverseSubpath(const planargraph::DirectedEdge *de,
		DirEdgeList& deList,
		DirEdgeList::iterator lit,
		bool expectedClosed);

	/**
	 * Finds an {@link DirectedEdge} for an unvisited edge (if any),
	 * choosing the dirEdge which preserves orientation, if possible.
	 *
	 * @param node the node to examine
	 * @return the dirEdge found, or null
	 *         if none were unvisited
	 */
	static const planargraph::DirectedEdge* findUnvisitedBestOrientedDE(
			const planargraph::Node* node);

	/**
	 * Computes a version of the sequence which is optimally
	 * oriented relative to the underlying geometry.
	 *
	 * Heuristics used are:
	 *
	 * - If the path has a degree-1 node which is the start
	 *   node of an linestring, use that node as the start of the sequence
	 * - If the path has a degree-1 node which is the end
	 *   node of an linestring, use that node as the end of the sequence
	 * - If the sequence has no degree-1 nodes, use any node as the start
	 *   (NOTE: in this case could orient the sequence according to the
	 *   majority of the linestring orientations)
	 *
	 * @param seq a List of planarDirectedEdges
	 * @return the oriented sequence, possibly same as input if already
	 *         oriented
	 */
	DirEdgeList* orient(DirEdgeList* seq);

	/**
	 * Reverse the sequence.
	 * This requires reversing the order of the dirEdges, and flipping
	 * each dirEdge as well
	 *
	 * @param seq a List of DirectedEdges, in sequential order
	 * @return the reversed sequence
	 */
	DirEdgeList* reverse(DirEdgeList& seq);

	/**
	 * Tests whether a complete unique path exists in a graph
	 * using Euler's Theorem.
	 *
	 * @param graph the subgraph containing the edges
	 * @return true if a sequence exists
	 */
	bool hasSequence(planargraph::Subgraph& graph);

public:

	static geom::Geometry* sequence(const geom::Geometry& geom)
	{
		LineSequencer sequencer;
		sequencer.add(geom);
		return sequencer.getSequencedLineStrings();
	}

	LineSequencer()
		:
		factory(nullptr),
		lineCount(0),
		isRun(false),
		sequencedGeometry(nullptr),
		isSequenceableVar(false)
		{}

	/**
	 * Tests whether a {@link Geometry} is sequenced correctly.
	 * {@llink LineString}s are trivially sequenced.
	 * {@link MultiLineString}s are checked for correct sequencing.
	 * Otherwise, isSequenced is defined
	 * to be true for geometries that are not lineal.
	 *
	 * @param geom the geometry to test
	 * @return true if the geometry is sequenced or is not lineal
	 */
	static bool isSequenced(const geom::Geometry* geom);

	/**
	 * Tests whether the arrangement of linestrings has a valid
	 * sequence.
	 *
	 * @return true if a valid sequence exists.
	 */
	bool isSequenceable() {
		computeSequence();
		return isSequenceableVar;
	}

	/**
	 * Adds a {@link Geometry} to be sequenced.
	 * May be called multiple times.
	 * Any dimension of Geometry may be added; the constituent
	 * linework will be extracted.
	 *
	 * @param geometry the geometry to add
	 */
	void add(const geom::Geometry& geometry) {
		geometry.applyComponentFilter(*this);
	}

  template
  void add(TargetContainer& geoms)
  {
    for (typename TargetContainer::const_iterator i = geoms.begin(),
         e = geoms.end(); i != e; ++i)
    {
      const geom::Geometry* g = *i;
      add(*g);
    }
  }

	/**
	 * Act as a GeometryComponentFilter so to extract
	 * the linearworks
	 */
	void filter(const geom::Geometry* g)
	{
		if (const geom::LineString *ls=dynamic_cast(g))
		{
			addLine(ls);
		}
	}

	/**
	 * Returns the LineString or MultiLineString
	 * built by the sequencing process, if one exists.
	 *
	 * @param release release ownership of computed Geometry
	 * @return the sequenced linestrings,
	 *         or null if a valid sequence
	 *         does not exist.
	 */
	geom::Geometry*
	getSequencedLineStrings(bool release=1) {
		computeSequence();
		if (release) return sequencedGeometry.release();
		else return sequencedGeometry.get();
	}
};

} // namespace geos::operation::linemerge
} // namespace geos::operation
} // namespace geos

#ifdef _MSC_VER
#pragma warning(pop)
#endif

#endif // GEOS_OP_LINEMERGE_LINESEQUENCER_H